Make sure that you are properly trained by another operator who can judge and confirm your proficiency before operating the Monarch Tractor by yourself.
Before you begin
To operate the Monarch Tractor, you’ll need to have the following:
- Safety equipment as required by your job site
- Monarch Tractor PIN code to log in to the Smart Screen
- Training to conduct the Daily Pre-Operation Check
- The Operator Guide and access to this Knowledge Base
To operate the Monarch Tractor:
- Using the provided grabrails, safely board the tractor. Do not use the steering wheel to board the tractor to avoid slipping.
- Sit in the tractor seat.
- To adjust the position of the seat, grab the handle on the right side of the seat’s base. Lift the handle and slide the seat until you’re sitting a safe distance away from the steering wheel.
- Adjust the amount of backrest and suspension.
- Buckle the seatbelt. Until the seatbelt is fastened the tractor won’t drive.
- Adjust the steering wheel tilt by holding the clip under the steering wheel.
- Make sure the tractor is in Neutral.
- To power on the tractor, press and hold the Start button below the steering wheel. When the tractor turns on, the power button glows blue, and the Smart Screen boots up.
- Enter your PIN code in the Smart Screen. Can’t remember you PIN? Ask an Admin to send a reminder.
- When asked to accept Terms and Conditions, tap Accept.
Why am I asked every time I start the MK-V? Accepting terms and conditions every time makes sure that all rules, rights, and requirements of tractor operation are understood and met by your site and employees. This protects your business and that of Monarch Tractor. - On the Smart Screen, tap the Motor button to start the tractor.
- Check the Smart Screen and Dashboard for any errors or warning icons.
- Confirm settings for the tractor and any implement attached.
- Put the tractor in Forward.
- Press the foot brake, and then take off the Parking Brake.
- Drive the tractor.