Skip to content
English
More support
Contact us
  • There are no suggestions because the search field is empty.

Using the 3-Point Hitch

The 3-Point Hitch is used to attach implements to the back of the MK-V. The hydraulics in the 3-Point Hitch are controlled by the Hydraulic Joystick. 

 


WARNING: Use the 3-Point Hitch only with equipment designed for 3-Point Hitch usage. To avoid injury, attach towed loads to the drawbar. Make sure to add proper counterbalance ballast on the front of the tractor when using the 3-Point Hitch.

IMPORTANT: Do not exceed the following capacities when attaching an implement to the Monarch Tractor:

  • 3-point hitch MAX lift: 1,650lbs (750 kg)
  • Drawbar MAX tow: 5,500lbs (2,500 kg)
  • Tongue MAX load: 1,100lbs (500 kg)

3-Point Hitch Controls

The hydraulics in the top link of the 3-Point Hitch are controlled with the Hydraulic Joystick. The auxiliary hydraulics on the back of the tractor are also controlled by the joystick.

The 3-Point Lever controls the lower links of the 3-Point Hitch.

A. PTO Switch
B. 3-Point lever
C. Hydraulic joystick

To lower or lift lower links:

  1. Press the top button.
  2. Pull lever back.

To move the hitch to the upper or lower limit:

  1. Move the lever in the desired direction, up or down. The hitch is moved to the max position.
  2. Press the top button.  

Connecting Implements to the 3-Point Hitch

Always attach the two lower arms, which are stationary, to the implement first. Then, adjust the top link and connect it.

To attach implements to the 3-point hitch:

  1. Back up the tractor as close to the implement connectors as you safely can.
  2. Adjust the height of the arms to match the implement.
  3. Connect the two lower stationary arms first.Insert a lynch pin in each lower link.
  4. Connect the top link after adjusting the arm’s length, then put a pin through the implement and the top link.